RUS  ENG
Full version
JOURNALS // Pisma v Zhurnal Tekhnicheskoi Fiziki // Archive

Pisma v Zhurnal Tekhnicheskoi Fiziki, 2021 Volume 47, Issue 22, Pages 3–8 (Mi pjtf4618)

This article is cited in 1 paper

Impact of transverse optical confinment on performance of 1.55 $\mu$m vertical-cavity surface-emitting lasers with a buried tunnel junction

S. A. Blokhina, M. A. Bobrova, A. A. Blokhina, N. A. Maleeva, A. G. Kuz'menkovb, A. P. Vasil'evb, S. S. Rochasc, A. V. Babichevc, I. I. Novikovc, L. Ya. Karachinskyc, A. G. Gladyshevd, D. V. Denisove, K. O. Voropaevf, A. Yu. Egorovd, V. M. Ustinovb

a Ioffe Institute, St. Petersburg
b Submicron Heterostructures for Microelectronics Research and Engineering Center, Russian Academy of Sciences, St. Petersburg
c St. Petersburg National Research University of Information Technologies, Mechanics and Optics
d Connector Optics LLC, St. Petersburg
e Saint Petersburg Electrotechnical University "LETI"
f JSC OKB-Planeta, Velikii Novgorod

Abstract: The impact of transverse optical confinement on the static and spectral characteristics of 1.55 $\mu$m vertical-cavity surface-emitting lasers (WF-VCSEL) with a buried tunnel junction (BTJ) $n^{++}$-InGaAs/$p^{++}$-InGaAs, implemented using molecular-beam epitaxy and wafer fusion. For lasers with a tunnel junction (TJ) etching depth of $\sim$15 nm, it was found that the single-mode lasing occurs up to 8 $\mu$m BTJ mesa size due to a relatively weak lateral optical confinement, while the effect of a saturable absorber (SA) appears when the BTJ mesa size is less than 7 $\mu$m. Enhancing lateral optical confinement by increasing the BTJ etching depth up to $\sim$20 nm leads to suppression of the SA effect at the BTJ mesa size of 5–6 $\mu$m, but at the same time limits the maximum single-mode optical power. According to the results of the analysis, an increase in the spectral mismatch between the maximum of the gain spectrum of the active region and the resonance wavelength of the WF-VCSEL up to $\sim$35–50 nm will make it possible to suppress the undesirable SA effect in a wide range of the BTJ mesa sizes maintaining the single-mode lasing.

Keywords: vertical-cavity surface-emitting laser, wafer fusion, molecular beam epitaxy, single-mode operation, saturable absorber.

Received: 30.06.2021
Revised: 19.07.2021
Accepted: 20.07.2021

DOI: 10.21883/PJTF.2021.22.51717.18942



Bibliographic databases:


© Steklov Math. Inst. of RAS, 2024