This publication is cited in the following articles:
Farshid Marzban, Mahshid Marzban, Kazem Mohammadzadeh, Somayeh Davoodabadi Farahani, “Comparative study of two-phase flow approaches for modeling conjugate heat transfer in a three-dimensional wavy microchannel-heat sink with CuO-water nanofluid”, Advances in Mechanical Engineering, 16:8 (2024)
M. S. Elmosbahi, M. Hamdi, M. Hazami, “Design and experimental analysis of heat transfer performance of a two-phase closed thermosyphon system”, J. Appl. Mech. Tech. Phys., 64:5 (2024), 858–870
B. Boudraa, R. Bessaih, “Heat transfer and entropy generation of water/TiO2 nanofluid flow in a wavy channel using two-phase mixture approach”, Thermophys. Aeromech., 29:4 (2022), 587
Amin Dezfulizadeh, Alireza Aghaei, Ali Hassani Joshaghani, Mohammad Mahdi Najafizadeh, “Exergy efficiency of a novel heat exchanger under MHD effects filled with water-based Cu–SiO2-MWCNT ternary hybrid nanofluid based on empirical data”, J Therm Anal Calorim, 147:7 (2022), 4781
Adel Bouali, Brahim Mohammedi, Salah Hanini, “A Smart Model for the Prediction of Heat Transfer Coefficient during Flow Boiling of Nanofluids in Horizontal Tube”, NHC, 36 (2022), 89
Yacine Khetib, Ahmad Alahmadi, Ali Alzaed, Suseel Jai Krishnan, Mohsen Sharifpur, Goshtasp Cheraghian, “Application of Cylindrical Fin to Improve Heat Transfer Rate in Micro Heat Exchangers Containing Nanofluid under Magnetic Field”, Processes, 9:8 (2021), 1278
Ali Akbar Abbasian Arani, Reza Moradi, “Shell and tube heat exchanger thermal-hydraulic analysis equipped with baffles and corrugated tubes filled with non-Newtonian two-phase nanofluid”, HFF, 31:4 (2021), 1214
Mohammad Vahedi, Yaser Mollaei Barzi, Masoumeh Firouzi, “Two-phase simulation of nanofluid flow in a heat exchanger with grooved wall”, J Therm Anal Calorim, 146:3 (2021), 1297
Ehsan Aminian, Hesam Moghadasi, Hamid Saffari, Amir Mirza Gheitaghy, “Investigation of Forced Convection Enhancement and Entropy Generation of Nanofluid Flow through a Corrugated Minichannel Filled with a Porous Media”, Entropy, 22:9 (2020), 1008
Jalal Alsarraf, Amin Shahsavar, Roohollah Babaei Mahani, Pouyan Talebizadehsardari, “Turbulent forced convection and entropy production of a nanofluid in a solar collector considering various shapes for nanoparticles”, International Communications in Heat and Mass Transfer, 117 (2020), 104804
Soroush Sadripour, Mohammad Estajloo, Seyed Abdolmehdi Hashemi, Ali J. Chamkha, Mahmoud Abbaszadeh, “Optimization of four models flatbread bakery machines in Iran”, HFF, 30:6 (2020), 3399
Sara Rostami, Amin Shahsavar, Gholamreza Kefayati, Aysan Shahsavar Goldanlou, “Energy and Exergy Analysis of Using Turbulator in a Parabolic Trough Solar Collector Filled with Mesoporous Silica Modified with Copper Nanoparticles Hybrid Nanofluid”, Energies, 13:11 (2020), 2946
Liu Yang, Kai Du, Zhongbin Zhang, “Heat transfer and flow optimization of a novel sinusoidal minitube filled with non-Newtonian SiC/EG-water nanofluids”, International Journal of Mechanical Sciences, 168 (2020), 105310
Yulin Ma, Mojtaba Jamiatia, Alireza Aghaei, Mohammad Sepehrirad, Amin Dezfulizadeh, Masoud Afrand, “Effect of differentially heated tubes on natural convection heat transfer in a space between two adiabatic horizontal concentric cylinders using nano-fluid”, International Journal of Mechanical Sciences, 163 (2019), 105148
Mahdi Ashoori, Ghanbarali Sheikhzadeh, Soroush Sadripour, “The effects of using ceiling fans on human thermal comfort in a three-dimensional room with centralized heating including an occupant”, HFF, 29:10 (2019), 3976
