|
|
Publications in Math-Net.Ru
-
Analysis of the effect of driving belts on the interaction between elongated projectiles and light alloy barriers
Vestn. Tomsk. Gos. Univ. Mat. Mekh., 2024, no. 89, 66–76
-
Experimental and theoretical method for determining the law of constant-volume combustion of a high-density propellant
Fizika Goreniya i Vzryva, 59:4 (2023), 71–77
-
On the effect of a rigid boundary on the supercavity profile
Vestn. Tomsk. Gos. Univ. Mat. Mekh., 2023, no. 86, 70–78
-
Analytical models of thermal conductivity in two-phase dispersive media. 1. Theoretical study
Vestn. Tomsk. Gos. Univ. Mat. Mekh., 2023, no. 86, 35–54
-
A study of combustion features of high-density propellants in a nozzle test facility
Vestn. Tomsk. Gos. Univ. Mat. Mekh., 2023, no. 84, 109–122
-
Underwater launching of a supercavitating projectile out of a ballistic test setup
Vestn. Tomsk. Gos. Univ. Mat. Mekh., 2023, no. 82, 97–107
-
A study of the ignition and combustion of high-density charges under constant volume conditions
Vestn. Tomsk. Gos. Univ. Mat. Mekh., 2023, no. 81, 123–132
-
Íigh-speed interaction of tungsten-carbide-alloy samples with a multicomponent binder with à steel striker
Pisma v Zhurnal Tekhnicheskoi Fiziki, 47:14 (2021), 11–13
-
Calculation of transparent armor resistance to a high-speed impact by a spherical projectile
Pisma v Zhurnal Tekhnicheskoi Fiziki, 47:3 (2021), 29–33
-
Estimation of ultimate capability of a shot with use high-density propellants for an increase in projectile muzzle velocity
Vestn. Tomsk. Gos. Univ. Mat. Mekh., 2021, no. 74, 71–78
-
Allowance for the effect of condensed particles on ballistic parameters of a shot
Vestn. Tomsk. Gos. Univ. Mat. Mekh., 2021, no. 73, 50–59
-
Investigation of underwater motion parameters for inert conical models
Vestn. Tomsk. Gos. Univ. Mat. Mekh., 2021, no. 71, 78–89
-
Influence of the initial propellant temperature and ignition method on ballistic characteristics of a shot in the setting of a 120 mm caliber model ballistic installation
Vestn. Tomsk. Gos. Univ. Mat. Mekh., 2021, no. 70, 37–50
-
Research of high-density fuels combustion under the conditions of a model ballistic plant
Vestn. Tomsk. Gos. Univ. Mat. Mekh., 2021, no. 69, 127–138
-
Investigation of the possibilities of increasing the projectile velocity under the conditions of electrothermal-chemical ignition technology as applied to a medium-caliber installation
Vestn. Yuzhno-Ural. Gos. Un-ta. Ser. Matem. Mekh. Fiz., 13:4 (2021), 37–43
-
A study of the protective properties of a combined cermet material upon a high-speed impact
Zhurnal Tekhnicheskoi Fiziki, 90:6 (2020), 965–975
-
Effect of the initial temperature on the penetration of tungsten-based porous alloy strikers with a hardening filler into a steel obstacle
Zhurnal Tekhnicheskoi Fiziki, 90:5 (2020), 811–816
-
Destruction features of impactors made of a porous alloy based on tungsten with reinforcing filler when interacting with armored obstacles
Zhurnal Tekhnicheskoi Fiziki, 90:3 (2020), 434–440
-
Single and joint movement of supercavitating strikers in the supersonic mode in water
Pisma v Zhurnal Tekhnicheskoi Fiziki, 46:23 (2020), 22–24
-
Study of the paste-like propellant combustion at various loading schemes
Vestn. Tomsk. Gos. Univ. Mat. Mekh., 2020, no. 67, 89–101
-
Studying the mutual influence of a set of strikers during simultaneous high-velocity entry into water
Pisma v Zhurnal Tekhnicheskoi Fiziki, 45:20 (2019), 47–50
-
Development and investigation of a two-layer metal–ceramic material for protective barriers in conditions of high-speed impact
Zhurnal Tekhnicheskoi Fiziki, 88:7 (2018), 1018–1024
-
Synthesis of two-layer metal–ceramic materials with high-velocity-impact resistance based on refractory compounds and titanium
Pisma v Zhurnal Tekhnicheskoi Fiziki, 44:8 (2018), 63–69
-
Intrusion features of a high-speed striker of a porous tungsten-based alloy with a strengthening filler in a steel barrier
Pisma v Zhurnal Tekhnicheskoi Fiziki, 43:17 (2017), 41–47
-
Investigation of gas-dynamic features of a moving model with a pulse jet engine (CPJE) inside a barrel
Vestn. Tomsk. Gos. Univ. Mat. Mekh., 2015, no. 3(35), 45–51
-
On the loss of stability of a rod in a cavitation bubble when entering into water through a barrier
Vestn. Tomsk. Gos. Univ. Mat. Mekh., 2012, no. 4(20), 87–93
-
Increase of efficiency of high-speed throwing of strikers with application of high-energy fuels with nanodispersed fillers
Vestn. Tomsk. Gos. Univ. Mat. Mekh., 2012, no. 2(18), 67–79
-
Research of the penetrating ability of steel and textolite compound strikers into armor plates using the experiment-calculated method
Vestn. Tomsk. Gos. Univ. Mat. Mekh., 2011, no. 3(15), 87–98
-
Analysis of dynamic durability of armour plates at shock loading by use of the experiment-calculated method
Vestn. Tomsk. Gos. Univ. Mat. Mekh., 2010, no. 2(10), 71–78
-
Mathematical modelling of bone tissue destruction under dynamic load
Vestn. Tomsk. Gos. Univ. Mat. Mekh., 2010, no. 2(10), 28–37
-
Integrodifferential method for determining the combustion behavior of condensed systems under constant volume condition. Reply to comments of V. M. Ushakov
Fizika Goreniya i Vzryva, 36:4 (2000), 146–148
-
Combustion of dispersing porous monoblock fuels in a semiclosed volume
Fizika Goreniya i Vzryva, 36:4 (2000), 15–23
-
Integrodifferential method for determining the combustion behavior of condensed systems under constant volume condition
Fizika Goreniya i Vzryva, 35:1 (1999), 67–71
-
Effect of force interphase interaction on the characteristics of convective combustion of porous media
Fizika Goreniya i Vzryva, 33:4 (1997), 65–77
-
A deterministic model of convective combustion of porous systems
Fizika Goreniya i Vzryva, 24:5 (1988), 40–48
-
Variation of the velocity of propagation of a thermal-diffusion flame over a wide range of Lewis numbers
Fizika Goreniya i Vzryva, 20:5 (1984), 35–42
© , 2024